Support


BlogRoll

  • Tech-Recipes Aggregator
    0
  • Digital Streets
    0
  • What's cooking at Tech-Recipes
    0
  • See one, do one, teach one.
    0
  • digital tirades of seamonkey420
    0
  • Johnny's Thoughts
    0
  • Molten Networks
    0

    • Replace your iPod Mini battery

    March 27th, 2007 by professoripod

    The only thing that holds me back from doing this hack is being bothered to buy another iPod mini battery -_-

    - Use a flat-head screwdriver to pry the white plastic cover from the top and bottom of the iPod.

    - The covers should be attached to the case by a small amount of glue.

    - Use a Phillips head screwdriver to remove the two screws at the top of the iPod.

    - Remove a small metal clip beneath the bottom case cover by placing the tip of a screwdriver in each of the four corners of the clip, prying each side loose.

    - Use the tip of the screwdriver to pop the connector out of its socket.

    - Push from the bottom and slide the motherboard out the top of the iPod case.

    - Remove the battery from its spot on the motherboard by gently lifting it.

    - Take out the old power connector by gently lifting it free from the power socket.

    - Plug in the new battery and place it in its position on the motherboard.

    - Reassemble the iPod.

    Once again, be aware of the fact that your iPod mini will need a minimum 3 hours of charging before it can be used.

    Hope it worked!

    Posted in iPod |

    Leave a reply


    Syndication

    Pages

    Categories

    Archives

    Recent update